SONY索尼 PTR-3000 BD刻版機 中古

format for high capacity and high definition video content.

     Sony plans to create a total mass production BD-ROM test line, including PTR-3000 and BD-ROM disc replication line, in Terre Haute, Indiana, USA. This line will operate in tandem with the existing Sony Disc Technology Inc. Shizuoka technology center in Japan.

BD-ROM Mastering system"PTR-3000"	BD-ROM master disc in the system

     Since larger capacity optical discs require the pit to be smaller on the disc, current DVD mastering technology was not compatible for use in next generation optical discs.

     PTM technology uses a special inorganic resist which is comprised of metal oxide. It utilizes a chemical heat reaction generated from the changing phase of amorphous to crystal, instead of photo resist, in the fine pitch recording of electron beam or deep UV laser. This laser uses 405nm wavelength consumer blue laser to make the smaller pit.

     PTR-3000 consists of 3 simple units: Sputtering, Cutting and Developing. In the manufacturing process, instead of a glass substrate and photo resist, the system uses a silicon wafer and inorganic resist that eliminates the pre-process and conductivity process. As a result, it became possible to directly duplicate the stumper. Therefore, the PTM process and current master galvanizing process combined reduce the mastering processes from 11 to 5 process steps.