規則+不規則式倒角機

特點Features:

1. 採用成型倒角刀切削

2. 採用變頻馬達由0~12000R.P.M以內,可依各種材質進行切割(不含熱處理).

3. 針對規則、不規則曲面、內溝、及外形內形輪廓複雜之曲面均可倒角

4. 工作另件8mm內徑,內溝寬度8mm或圓弧4R以上皆可倒角

5. 倒角能力0~2C,3R以內

6. 倒角後工件成45度面

A. Adopt with standard carbide end mill cutting.

B. Equipped with inverter motor, range of speed 0~12000r.p.m

   Depending on different materials do different chamfering process. (Except heat treatment)

C. Special for chamfering regular and irregular curving surface, such as inner gap,

   Complex curve surface of inner or outer.

D. Available for chamfering workpeice with inner diameter and inner gap width with 8mm

   Or radian with 4R or above.

E. Chamfer ability range: within 0~2C or 3R

F. Workpeice with angle 45 degree after chamfered.