Applications Accept :
Applications |
||
|
Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor |
|
|
Interlock/selective Sw. - Proximity switch |
|
|
Aux. contact of transducer / detector |
|
|
As I/O of S/W PLC Controller |
|
|
Industrial ON/OFF control |
|
Features |
||
|
8 isolated DI and 8 isolated DO channels |
High voltage isolation on all isolated channel(2500Vac) |
|
32-bit timer |
|
|
Software debounce : No debounce, 100Hz, 200Hz, 1KHz |
|
|
No output transition during start-up |
Output status readback |
|
External triggered interrupt(on IN00 ~ IN07) |
Keep output state after hot reset(jumper selectable) |
|
Software key function |
|
Specifications (With Matched Wiring Board) |
||
|
Main Card -- Digital Input |
|
|
Input : 8 photo-isolated |
Software debounce : No debounce, 100Hz, 200Hz, 1KHz |
|
ON state : 2.8Vdc(max) 4.5mA(min) |
OFF state : 8Vdc(min) 3mA(max) |
|
Switching Speed : limited by photo coupler speed |
Interrupt at IN00 ~ IN07 |
|
Main Card -- Digital Output |
|
|
Output : 8 photo-isolated |
Output rating : 3A @250Vac, 30Vdc(Relay) |
|
Output range : Open collector 0 ~ 45Vdc(on card) |
1A @24Vdc(PMOS) |
|
Sink current : 500mA(peak) per channel(on card) |
2A @240Vac(SSR)(with wiring board) |
|
Switching speed : 20KHz(max)(MOS out only) |
|
|
Main Card -- Timer |
|
|
32-bit timer based on 1us time base |
Time up interrupt |
|
Main Card -- General |
|
|
Card ID : 0~3 |
Operation temperature : 0 to +70 degree C |
|
Insulation resistance : 100M Ohm(min) at 1000Vdc |
Storage temperature : -20 to +80 degree C |
|
Isolation voltage : 2500Vac 1Min |
Operation humidity : 5~95% RH, non-condensing |
|
Connector : One 20-pin male flat cable connectors |
Dimensions : 90(W)*96(H) mm, 3.55(W)*3.78(H) in |
|
DIN rail mounted wiring board |
|
|
Power Requiremant : 24Vdc ± 4Vdc |
https://www.seoweb66.com/web/QA?postID=998498日本 OBARA 雷射焊接機
YAG雷射焊接的特色:與電阻焊等不同,屬於非接觸性的焊接,不會使加工物因加壓而造成變形。 企業名片
歷史詢價
立即成為台灣黃頁 詢價供貨商,
再送你獨立詢價官網!
免費註冊
|