Applications An
Applications |
||
|
Analog signal measurement for physical signal of temperature, voltage, current, flow, light......etc |
|
|
Digital i/o control of switch input, relay control, trigger output |
|
|
Counter / Timer for event counting, periodic interrupt source, PWM generator(can work as D/A with external low pass filter), |
|
|
counter / timer with trigger out, duration counter |
|
Features |
||
|
8 channel 12-bit analog inputs(standard : 8 channels) |
|
|
Software selectable input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V |
|
|
Factory pre-calibrated analog conversion accuracy |
2 byte-wide programmable TTL I/O |
|
DIO00, DIO01 as trigger / counter in, DIO10, DIO11 as trigger out of timer / counter function |
|
|
2 32-bit multifunction counters up to 8MHz |
|
|
Multi-function : programmable one-shot; square wave generator; event counter; PWM generator |
|
|
Software key function |
|
Specifications (With Matched Wiring Board) |
||
|
Main Card -- Analog Input |
|
|
Input channel : 8 channels(standard : 8 ) |
Input range : -10V ~ +10V, -5V ~ +5V, 0 ~ 10V, 0 ~ 5V |
|
Input type : single end or differential |
Range selection : software selectable per chip |
|
Resolution : 12-bit |
Conversion speed : 6us per chip |
|
Accuracy : full range within 5mV(after calibration) |
|
|
Main Card -- Digital I/O |
|
|
I/O channels : 16 TTL(2 ports) |
Configuration : programmable byte input / output |
|
Main Card -- Timer / Counter |
|
|
Channels : 2 |
Specific input : trigger in / counter in via digital I/O port0 |
|
Data length : 32-bit |
Specific output : trigger out / counter out via digital I/O port 1 |
|
Time base : 4MHz |
|
|
Multi-function : programmable one-shot; square wave generator; event counter; PWM generator |
|
|
Main Card -- General |
|
|
PCI data width : 32-bit |
Security password : 10 bytes, user configurable |
|
Card ID : 4-bit |
Interrupt : software disable / enable |
|
Dimension : 154(W)*112(H) mm, 6.06(W)*4.41(H) in |
|
|
DIN rail mounted wiring board |
|
|
Connection cable :
本公司專營天地蓋禮盒等尺寸依產品客製化設計1000PCS起訂03-425-1601 陳經理 |