Applications Analog I
Applications |
||
|
Analog Input Section : For measurement of analog signal such as : temperature; voltage; current; flow; light ... |
|
|
Note : The analog signal should be pre-processed to the acceptable range of the card. |
|
|
Analog Output Section : For control or signal generation such as : inverter speed; servo motor speed; wave generation; |
|
|
valve control; light control... |
|
|
Digital Section : For the control of digital i/o : switch input; relay control; trigger output...... |
|
Features |
||
|
32 channels AD input |
Multi-range : 0 ~ 5V, 0 ~ 10V, -5 ~ +5V, -10 ~ +10V |
|
Programmable input type : single end or differential |
End of conversion interrupt |
|
2 channel 12-bit resolution |
Output range : -10 ~ +10V |
|
2 port TTL digital I/O channels |
|
|
Programmable digital filter at 100Hz, 200Hz, 1KHz and no de-bounce for input |
|
|
No output transition during start-up |
Output status read back |
|
External triggered interrupt(on IO00 ~ IO07) |
32-bit timer with cross zero interrupt |
Specifications (With Matched Wiring Board) |
||
|
Main Card -- AD |
|
|
Resolution : 12-bit |
Range : 0 ~ 5V, 0 ~ 10V, -5 ~ +5V, -10 ~ +10V |
|
Acquisition time : 100K sample per second |
Integral linearity error : -1 ~ +1 LSB(max) |
|
Differential linearity error : -1 ~ +1 LSB(max) |
Zero error : Bipolar -9 ~ +9 LSB(max) |
|
Full scale error : Bipolar -0.35% ~ +0.35%(max) |
Unipolar -6 ~ +6 LSB(max) |
|
Unipolar -0.45% ~ +0.45%(max) |
Input impedance : channel to ground |
|
On board analog input protection : -24V ~ +24V 50mA |
Bipolar : 31K ohm |
|
|
Unipolar : 42K ohm |
|
Main Card -- DA |
|
|
Resolution : 12-bit |
Range : -10 ~ +10V |
|
Conversion time : < 1us |
沅紘企業有限公司以鋼帶打包機,塑帶打包機,全自動包裝,耗材及附屬設備等。為專業經營領域,提供您 |